2025 Chevrolet Silverado 6500 Crew Cab DRW 4WD Reading Mechanics Body
Stock #SH710584
Chassis Details
Mileage
6
Stock Number
SH710584
Stock Type
New
Year
2025
Make
Chevrolet
Model
Silverado 6500
Class
6
GVWR
23,000
Drivetrain
4WD
Wheelbase
175
Cab Type
Crew
Vehicle Trim
Work Truck
Vehicle VIN
1HTKJPVM4SH710584
Interior Color
Jet Black
Exterior Color Description
Summit White
Engine Cylinder Count
8
Engine
Turbocharged Diesel V8 6.6L/403
Transmission Type
Automatic
Rear Wheels
Dual
Fuel Type
Diesel
Engine Size (L)
6.6
Brake Type
Hydraulic
Vehicle Options
- RUGGED DUTY SERVICE TRANSMISSION AUTOMATIC CLOSE-RATIO 6 SPD WITH DOUBLE OVERDRIVE ALLISON A2750RDS ratios: 3.10 1ST 1.80 2ND 1.40 3RD 1.00 4TH 0.70 5TH 0.61 6TH Rugged Duty Series includes park pawl
- BATTERIES HEAVY-DUTY DUAL 1300 COLD-CRANKING AMPS includes battery box mounted to left side under cab
- BACKUP ALARM (Includes (SFW) SEO Calibration for backup alarm.
- GLASS DEEP-TINTED
- ASSIST STEPS ALUMINUM
- REAR AXLE 15 500 LB. (7 031 KG)
- SKID PLATE STEEL FRAME-MOUNTED PROTECTS THE TRANSFER CASE FROM THE GROUND
- SUMMIT WHITE
- DEFOGGER REAR-WINDOW ELECTRIC
- GRILLE CHROME
- ENGINE BLOCK HEATER
- BUMPER FRONT CHROME
- POWER TAKE OFF ENGINE CONTROL PROVISIONS Access is available on left-hand and right-hand side
- FUEL TANK FRONT AND REAR 65 GALLON TOTAL
- BACK-UP ALARM CALIBRATION This calibration will allow installation of an aftermarket back-up alarm by disabling rear perimeter lighting
- POWER OUTLET 110-VOLT AC
- HORN TRUMPET STYLE DUAL-NOTE
- REMOTE KEYLESS ENTRY
- WORK TRUCK PREFERRED EQUIPMENT GROUP includes standard equipment
- PROVISION FOR CAB ROOF-MOUNTED LAMP/BEACON provides an overhead console mounted switch and electrical wiring tucked beneath the headliner for a body upfitter to connect a body-mounted warning or emergency lamp
- GVWR 23 000 LBS. (10 433 KG)
- BATTERY TOP POST THREADED BATTERY JUMP START STUD (located on battery box)
- WHEELBASE 199 (505.5 CM) 84 CA
- 34 000 LBS. GCWR (15 422 KG)
- SPARE TIRE DELETE (STD)
- ALTERNATOR 220 AMPS
- AUXILIARY HARNESS 3' FOR HEADLAMPS AND TURN SIGNALS
- JET BLACK CLOTH SEAT TRIM includes manually adjustable driver lumbar
- SEATS FRONT 40/20/40 SPLIT-BENCH CLOTH OR VINYL 3-PASSENGER. Includes driver and front passenger recline with outboard head restraints and center fold-down armrest with storage. Also includes manually adjustable driver lumbar and storage pockets. Includes (AG1) 10-way power seat.)
- PAINT SOLID
- SEAT ADJUSTER DRIVER 10-WAY POWER
- AUDIO SYSTEM CHEVROLET INFOTAINMENT SYSTEM WITH 7 DIAGONAL COLOR TOUCH-SCREEN AM/FM STEREO with seek-and-scan and digital clock includes Bluetooth handsfree calling and streaming audio with select phones; wired phone projection via select 3rd party apps; USB ports; auxiliary jack.
- SHOCK ABSORBERS REAR
- 6500 HD SERIES
- SNOW PLOW PREP PACKAGE includes (UNL) auxiliary harness for headlamps and turn signals (KW5) 220-amp alternator forward lamp wiring harness and (TRW) provision for cab roof mounted lamp/beacon
- ELECTRICAL PROVISIONS REAR OF FRAME UPFITTER BODY BUILDER WIRING includes Sealed Connectors for Tail/Amber Turn/Marker/Backup/Accessory Power/Ground and Sealed Connector for Stop/Turn
- RECOVERY HOOKS FRONT FRAME-MOUNTED BLACK
- FRONT AXLE 7 500 LBS DANA SPICER 60-256 SINGLE-REDUCTION FRONT DRIVING
- DPF DIESEL PARTICULATE FILTER MANUAL REGENERATION customer regeneration will not be allowed until the DPF load percentage has reached 100% full and a driver information center (DIC) message has been shown
- WHEELS 19.5 X 6.75 4-ALUMINUM WHEELS 8-HOLES HUB PILOTED Dura-Bright finish is on the outside of the wheel
- TIRES FRONT 225/70R19.5H TRACTION BLACKWALL CONTINENTAL Max Axle Load: 8 000 lbs.
- MUD FLAPS FRONT
- EXHAUST SYSTEM STRAIGHT TERMINATES AHEAD OF REAR WHEELS
- TIRES REAR 225/70R19.5H TRACTION BLACKWALL CONTINENTAL Max Axle Load: 16 000 lbs.
- MIRRORS OUTSIDE BLACK HEATED POWER-ADJUSTABLE HIGH-VISIBILITY VERTICAL CAMPER-STYLE AND LOWER CONVEX SPOTTER GLASS MANUAL-FOLDING. Convex glass is not heated and not power adjustable. 102 Wide Load
- GRILLE GUARD SCREEN STONE PROTECTION (mounted to bumper)
- ENGINE DURAMAX 6.6L TURBO-DIESEL V8 B20-DIESEL COMPATIBLE 350 hp @ 2500 rpm 750 lb.-ft. torque @ 1400 rpm (STD)
- REAR SUSPENSION 15 500 LBS. (7 031 KG) MULTI-LEAF VARI-RATE
- REAR AXLE 4.30 RATIO Max road speed: 79 MPH
- Turbocharged
- Four Wheel Drive
- Power Steering
- ABS
- Tires - Front All-Season
- Tires - Rear All-Season
- Running Boards/Side Steps
- AM/FM Stereo
- MP3 Capability
- Auxiliary Audio Input
- Split Bench Seat
- Pass-Through Rear Seat
- Rear Bench Seat
- Adjustable Steering Wheel
- Power Windows
- Power Door Locks
- Cruise Control
- A/C
- Traction Control
- Stability Control
- Traction Control
- Daytime Running Lights
- Automatic Headlights
- Driver Air Bag
- Passenger Air Bag
- Front Side Air Bag
- Front Head Air Bag
- Rear Head Air Bag
- Passenger Air Bag On/Off Switch
- Back-Up Camera
- View All
Body Details
Manufacturer
Body Type
Mechanics Body
Body Model
RM-45 11' Mechanics Body
Air Compressor Manufacturer
Vanair
Crane Manufacturer
Palfinger
Crane Model Number
RSC8029H
Crane Description
Telescopic PTO Driven Crane
Body Material
Steel
Body Height
44"
Body Width
96"
Body Length
132"
Body Inside Width
50.25"
Bumper Description
Rear Workbench Bumper with 20K 2.5" Receiver Tube
Bumper Depth
21"
Cargo Control Type
Tie-Down Rings
Cargo Control Quantity
6
Compartment Description
44" High Sides with 60" Curbside V1 and V2 Compartments
Compartment Height
44"
Compartment Depth
22"
Compartment Description
(1) CTECH 7-Drawer Units
Floor Description
Treadplate
Floor Material
Steel
Lighting Description
Compartment Lighting
Lighting Type
LED
Lighting Description
Work Lights
Lighting Quantity
4
Lock System Type
Master Locking System
Outriggers Description
Power Out/Power Down Outriggers
Shelving Description
Adjustable Compartment Shelves
Welder Description
Welder Bracket
Hose Reel Manufacturer
Reelcraft
Hose Reel Description
50' x 1/2" Hose Reel
Hitch Type
Receiver
Hitch Size
2.5"
Alarm Type
Back Up
Camera Description
Factory Backup Camera
Master Mechanic HD Crane Features
The design is the result of over 40 years of custom body building experience coupled with valuable input from the end-user community and our loyal customer base. They include more standard features and benefits than our competitors standard production bodies — Feature Superior + Price Competitive = best overall VALUE available.
Designed and manufactured to withstand the harshest environments and most demanding field applications while providing the user with the highest quality, most user friendly, versatile, functional, and safe body available.
- The Master Mechanic™ Series 20 Series crane bodies are built for up to a 4,000 lb. crane.
- The Master Mechanic™ Series 25 Series crane bodies are built for up to a 5,000 lb. crane.
- The Master Mechanic™ Series 45 Series crane bodes are built for up to a 7,500 lb. crane.
- The Master Mechanic Series 78 Series crane bodes are built for up to a 12,000 lb. crane.
| Call For Pricing |
Pricing Details
Disclaimer:
Recently installed dealer equipment may not be reflected in the price above. We also offer a range of conversion vehicles that have been extensively upfitted after they have left the factory. Occasionally, the original factory invoice and MSRP information will override the updated information on these vehicles, creating an error in pricing. We always recommend you call us to confirm pricing and availability if you are interested in a particular vehicle. The listed prices do not include additional fees and cost of closing, such as government fees and taxes, any finance charges, any dealer documentation fees (if applicable on vehicles for personal use), any emissions testing fees or any other fees.